SolvEco^TM : REDUCER - FINAL WASH

SolvEco^TM REDUCER / FINAL WASH is an ultra-powerful, residue-free cleaner and reducer designed for automotive bodywork and plastic surface preparation. It effectively cleans, degreases, and prepares PVC, CPVC, and ABS surfaces prior to painting, while also thinning urethane coatings. Formulated without PCBTF or other carcinogens, it delivers professional performance while complying with the latest VOC standards.

WHY USE OUR SolvEco^TM REDUCER / FINAL WASH?

Dries quickly without leaving residues
Reduces urethane coatings
Cleans and prepares surfaces before painting
Automotive bodywork cleaner
Acts as a PVC, CPVC, and ABS primer wash
Removes grease, salt, and organic dirt
No PCBTF (parachlorobenzotrifluoride)
No “toxic” skull-and-crossbones pictogram
Not a PROP 65 product
VOC compliant

Buy online!

Starting from 16.65 $

Order

	Secure transaction with Square
	Orders are processed quickly within 48 hours
	Question related to this product or this order?
	Return policy
	FREE SHIPPING on all orders over 100$

SDS | Safety Data Sheet

Product tip

Before using the product, carefully read all the instructions on our website and all the warnings on the back.
TO OPEN, follow the procedure illustrated on the cap. CAUTION: Contents may be under pressure. To avoid splashing when opening, place a cloth over the safety seal and open carefully. Close the cap tightly after each use, remove any excess and store the container in a cool place.
DO NOT BREATHE EMANATIONS FROM THIS PRODUCT: Always wear adequate protection to avoid contact with skin, eyes and respiratory tract.
ALWAYS WORK IN A WELL-VENTILATED AREA, ENSURING A SOURCE OF FRESH AIR AT ALL TIMES.
Stripper action time varies according to the type of coating and the number of coats to be removed.
Do not use on fiberglass, vinyl, linoleum, rubber, acrylic or plastics.

FAQ

Additional information

SolvEco^TM Reducer / Final Wash is an ultra-powerful, residue-free cleaner and reducer designed for surface preparation before painting—especially in automotive bodywork and plastic applications. It removes grease, salt, and organic dirt while helping prepare PVC, CPVC, and ABS surfaces for better bonding and paint performance. Formulated without PCBTF (parachlorobenzotrifluoride) or other carcinogens, it complies with the latest VOC standards.

What this product does

SolvEco^TM Reducer / Final Wash:
•   Cleans and prepares surfaces prior to painting
•   Removes grease, salt, and organic dirt
•   Helps prepare PVC, CPVC, and ABS surfaces
•   Works as a final wash step to promote bonding
•   Reduces/thins urethane coatings and resins
•   Used as an automotive bodywork cleaner before painting

Why Choose SolvEco^TM Reducer / Final Wash

•   Ultra-powerful formula that dries quickly without leaving residues
•   No PCBTF (parachlorobenzotrifluoride) or other carcinogens
•   No“toxic” skull-and-crossbones pictogram on label
•   Not a PROP 65 product
•   Compliant with the latest VOC standards
•   Designed for professional prep and cleaning applications

How to use

1.   Apply to a clean cloth or appropriate applicator.
2.   Wipe the surface thoroughly to remove contaminants.
3.   Allow the surface to dry completely before priming, painting, or bonding.
4.   Repeat as needed for heavily contaminated areas.

Always follow label directions and safety instructions

Recommended Uses :

•   Automotive bodywork cleaning before painting
•   Final surface wash prior to refinishing
•   PVC / CPVC / ABS surface preparation
•   Reducing compatible urethane products

Safety & Compliance :

•   Compliant with current VOC standards
•   Flammable — use only in well-ventilated areas
•   Refer to the Safety Data Sheet (SDS) for handling, storage, and safety details

Available Sizes:

• 946 ml
• 3.78 L (1 Gallon)

Questions or support:

If you need additional guidance or technical support, please contact our customer service team or visit our main website for more SolvEco^TM solutions.

Buy directly from the manufacturer!

FREE SHIPPING on all orders over $100.