Super Remover New Generation

Super Remover NEW GENERATION is a new revolutionary product without methylene chloride NMP or any other highly toxic chemicals. This new formula is safer than methylene chloride based products and is the strongest in its product category. Super Remover NEW GENERATION is an industrial grade paint remover. It is perfect for all stripping jobs. It can remove up to 5 layers of paint in one application.

WHY USE OUR MULTILAYER STRIPPER?

Removes oil, latex and epoxy paints, varnishes and all types of glues;
Ultra-fast action;
Water cleanable;
Safe for wood, metal and concrete;
Brings a natural finish to your furniture;
Gentle on antiques, but strong enough for heavy-duty projects and finishing work;

Buy online!

Starting from 24.95 $

	Secure transaction with Square
	Orders are processed quickly within 48 hours
	Question related to this product or this order?
	Return policy

SDS | Safety Data Sheet

TDS | Technical Data Sheet

Product tip

POUR AT LEAST 1/16 INCH (THICKNESS OF TWO PENNIES) DIRECTLY ON THE SURFACE.

45 MINUTES

LET IT ACT FOR AT LEAST 30 to 45 MINUTES. HOWEVER, DON'T LET IT DRY.

Warning

BEFORE PROCEEDING WITH YOUR STRIPPING PROJECT, REMEMBER THAT EACH PROJECT IS UNIQUE AND THAT THE PRODUCT’S REACTION TIME WILL VARY DEPENDING ON THE ITEM TO BE STRIPPED.

DO NOT CLEAN BRUSHES IN AN ACRYLIC SINK OR BATHTUB.

DO NOT USE ON VINYL, LINOLEUM, RUBBER, ACRYLIC AND PLASTICS.

Directions

DIRECTIONS

Carefully read all the directions and warnings on the back prior to usingthe product.

TO OPEN, follow the procedure shown on the cap. CAUTION! Contents may be under pressure. To avoid splatters when opening, place a rag over the safety seal and open carefully. Close cap tightly after each use, clean excess product and store container in a cool place.

Always wear protective gloves and clothing as well as eye and face protection.

For a reliable protection, use Super Remover Stripping Gloves.

The time required for the paint stripper to work will vary depending on the type of coating and the number of layers to be removed.

WOOD SURFACES: When most of the work is done, use a Super Remover stripping pad and a small amount of paint stripper to remove the rest of the coating while following the wood grain. If necessary, use the SolvÉco Wood Preparator to clean the surface thoroughly

Do not use this product on fiberglass, vinyl, linoleum, rubber, acrylic and plastics.

STEPS:

1. Pour a thick coat of Super Remover New Generation directly onto the surface to be stripped.

2. Spread evenly and rapidly with a paint brush, using a single stroke in a single direction, to create a uniform thick layer of 1/8 inch or more.

3. Let stand for at least 30 to 45 minutes. Do not rush this step.
Do not manipulate the paint stripper after its application to the surface being stripped, as this will interfere with the vapor barrier.

4. Use a plastic, metal or wooden spatula or scraper to test a small area and to see if the paint stripper has penetrated all layers. If not, let the paint stripper rest on the surface for a longer period.

5. When you notice that the product has reached its maximum effect for a single application, remove the residues. If some coating still needs to be removed, repeat steps 1, 2 and 3.