SolvEco^TM : ORIGINAL STRONG STRIPPER

SolvEco^TM ORIGINAL STRONG STRIPPER is a professional-grade, gel-based paint, varnish, and glue remover formulated with methylene chloride for maximum stripping power. Designed for demanding restoration and renovation projects, it removes multiple layers of coatings in a single application while clinging to vertical surfaces for effective dwell time.

WHY USE OUR SolvEco^TM ORIGINAL STRONG STRIPPER?

Professional-grade stripping power
No toluene, methyl hydrate, or mineral spirits
VOC compliant
Improved version of the original strong remover

Buy online!

Starting from 24.95 $

Order

	Secure transaction with Square
	Orders are processed quickly within 48 hours
	Question related to this product or this order?
	Return policy
	FREE SHIPPING on all orders over 100$

SDS | Safety Data Sheet

Product tip

Before using the product, carefully read all the instructions on our website and all the warnings on the back.
TO OPEN, follow the procedure illustrated on the cap. CAUTION: Contents may be under pressure. To avoid splashing when opening, place a cloth over the safety seal and open carefully. Close the cap tightly after each use, remove any excess and store the container in a cool place.
DO NOT BREATHE EMANATIONS FROM THIS PRODUCT: Always wear adequate protection to avoid contact with skin, eyes and respiratory tract.
ALWAYS WORK IN A WELL-VENTILATED AREA, ENSURING A SOURCE OF FRESH AIR AT ALL TIMES.
Stripper action time varies according to the type of coating and the number of coats to be removed.
Do not use on fiberglass, vinyl, linoleum, rubber, acrylic or plastics.

Directions

WARNING :

Although this product does not display a "skull and crossbones" symbol in accordance with current regulations (RPCCC) due to its low acute toxicity, it remains a dangerous product that must be handled with care.

The methylene chloride it contains, in addition to being a suspected human carcinogen, can act as a simple asphyxiant and cause death if used improperly.

Adequate ventilation is necessary to mitigate this risk and reduce your exposure to vapors. AT A MINIMUM, an open window with additional ventilation is required. UNDER NO CIRCUMSTANCES should this product be used in a closed or poorly ventilated room (such as a bathroom), as methylene chloride evaporates quickly and, being heavier than air, can displace oxygen from the breathable area.

DIRECTIONS

Carefully read all the directions and warnings on the back prior to usingthe product.
TO OPEN, follow the procedure shown on the cap. CAUTION! Contents may be under pressure. To avoid splatters when opening, place a rag over the safety seal and open carefully. Close cap tightly after each use, clean excess product and store container in a cool place.

Always wear protective gloves and clothing as well as eye and face protection.

For a reliable protection, use Super Remover Stripping Gloves.

The time required for the paint stripper to work will vary depending on the type of coating and the number of layers to be removed.

WOOD SURFACES: When most of the work is done, use a Super Remover stripping pad and a small amount of paint stripper to remove the rest of the coating while following the wood grain. If necessary, use the SolvÉco Wood Preparator to clean the surface thoroughly

Do not use this product on fiberglass, vinyl, linoleum, rubber, acrylic and plastics.

STEPS:

1. Pour a thick coat of SolvÉco Strong Stripper directly onto the surface to be stripped.

2. Spread evenly and rapidly with a paint brush, using a single stroke in a single direction, to create a uniform thick layer of 1/8 inch or more.

3. Let stand for at least 15 minutes. Do not rush this step. Do not manipulate the paint stripper after its application to the surface being stripped, as this will interfere with the vapor barrier.

4. Use a plastic, metal or wooden spatula or scraper to test a small area and to see if the paint stripper has penetrated all layers. If not, let the paint stripper rest on the surface for a longer period.

5. When you notice that the product has reached its maximum effect for a single application, remove the residues. If some coating still needs to be removed, repeat steps 1, 2 and 3.

FAQ

Additional information

SolvEco^TM Original Strong Stripper ultra-powerful gel stripper for paint, varnish, and glue. Designed for demanding stripping jobs, SolvEco^TM Original Strong Stripper removes multiple coating layers in one application and clings to vertical surfaces for maximum effectiveness.

What this product does

SolvEco^TM Original Strong Stripper:

•   Removes paint, varnish, and glue
•   Strips multiple layers in one step
•   Gel formula clings to vertical surfaces
•   Safe on wood, metal, and concrete

Why Choose SolvEco^TM Original Strong Stripper

•   Professional-grade stripping power
•   No toluene, methyl hydrate, or mineral spirits
•   VOC compliant
•   Improved version of the original strong remover

⚠️ Important Safety Notice

Contains methylene chloride. Use with extreme care.
•   Use ONLY in well-ventilated areas
•   Never use in enclosed spaces
•   Vapors can displace oxygen and cause serious injury or death
•   Always wear proper PPE and review the SDS before use

Available Sizes

• 946 ml
• 3.78 L (1 Gallon)

Questions or support

If you need additional guidance or technical support, please contact our customer service team or visit our main website for more SolvEco^TM solutions.

WARNING:

The methylene chloride it contains, in addition to being a suspected human carcinogen, can act as a simple asphyxiant and cause death if used improperly.